Skip to content

How to: Set the Target Quantity of a Material#

When you apply a single formula across multiple Steps, the formula refers to a constant target quantity. The primary quantity of the Material changes after every dispense, so the system cannot use it as the reference to calculate the quantities to dispense. To keep a constant reference, define the Target Material Quantity and the Target Material Units of the target Material.

Sequence of Steps#

  1. In the left side menu, select Business Data.
  2. From the Business Data panel, select Material.
  3. In the top ribbon, select New.
  4. Complete the Material data. For more information, see Create Material.
  5. Enter the Target Material Quantity. The value must be greater than zero. For example, 25.
  6. Select the Target Material Units. For example, Kg. The units are mandatory when you define the quantity.
  7. Select Create.

Warning

When you use a single BOM across multiple Steps, set the primary quantity of the Material to zero before the first operation. When you define the target quantity, every Weigh and Dispense operation adds the dispensed quantity to the primary quantity of the Material. The system adds the quantity directly in Consume mode and indirectly, through Sub-Materials, in Attach mode. When you do not define the target quantity, the operation sets the primary quantity to the dispensed quantity.

Note

While the Material has a Target Material Quantity and Target Material Units, the system restricts several Material operations. After all the partial Weigh and Dispense operations are complete, remove both properties.

Expected Result#

The target Material has a constant reference quantity. The system calculates the quantity to dispense for each ingredient against that quantity in every Step. For more information, see Calculate the Quantities to Weigh.