Setup FujiNexim#
Overview#
This feature is responsible for handling the connection to FujiNexim equipment.
How To Configure#
You can configure the Host IP and Port.
Relevant Artifacts#
The table below describes the properties for this entity type:
| Name | Type | Is Mandatory | Data Type | Description |
|---|---|---|---|---|
| IoTMedataDefinition | SmartTable | Yes | Metadata configuration for equipment integration |
How It Works#
You can set in IoTMetadataDefinition the appropriate values for your setup.
Every time you change this values you must restart the Automation Manager.
IoTMetadataDefinition Area Level Configuration#
IoT Metadata Definition is configured with the following:
| Resource | Resource Type | Area | Name | Value | Description |
|---|---|---|---|---|---|
| Fuji Line Area | FUJINEXIM_address | Host Ip Address | Address where the Fuji Interface is listening | ||
| Fuji Line Area | FUJINEXIM_port | Host Ip Port | Port where Fuji Interface is listening | ||
| Fuji Line Area | FUJINEXIM_autoConfigure | True | Send SetEv and StartEv commands at initial handshake sequence (uses machineName) | ||
| Fuji Line Area | FUJINEXIM_machineNames | Fuji Machine Names | Machine Names to use on autoConfigure setup (coma separated values) (if empty, will be sent to all machines) | ||
| Fuji Line Area | FUJINEXIM_maxNumberOfRetries | *NumberOfRetries | Number of retries for asynchronous messages. Each retry has an interval of 1000ms. By default, this value is set to 15.* |