Skip to content

Special Receive Material Transfer#

🔒 MaterialTransfer.SpecialReceive

Overview#

This operation is used to send a Material Transfer, without the need of an electronic user signature. The Material Transfer may have been prepared beforehand or it may be prepared in this operation.

Setup#

In order for the Send Material Transfer to be fully functional, one customization must be deployed in Critical Manufacturing's installation:

  • To resolve the Materials from the Source Facility from where the Inventory is taken for modes TransferInventory and ConsumeInventory.

Preconditions#

  • Material Transfer's universal state is Active and system state is Approved or Ready.
  • Material Transfer's TransferMode must be TransferInventory or TransferMaterial.
  • All Materials assigned to this TransferMaterial:
    • Must be Active.
    • Must be topmost and must not have SubMaterials.
    • Must not be On Hold.
    • Must be Queued or Processed.
    • Must be in the same Facility as the Material Transfer FromFacility.
    • If the Material Transfer's FromArea is defined, it must be in the same Area as the Material Transfer.
    • If the Material Transfer's FromStep is defined, it must be in the same Step as the Material Transfer.
    • If the Material Transfer.FromStep is defined, the FromStep must have the property IsMaterial TransferStep set to true.
    • All Materials must be in the same Step (and hence, the same Area).
    • The Material Product must match the Material Transfer's Product.
    • The Material* must not be associated with any other Material Transfer.
  • All MaterialTransfer.Material.Quantity must be > 0 and must be <= Material Transfer.Material PrimaryQuantity and can only be decimal if Material Transfer.Product property Material TransferDecimalQuantityAllowed is true.

Sequence of Steps#

Step 1: Details#

  1. In case the Material Transfer has not yet been prepared, it is necessary to provide one or more Materials and respective quantities to fulfill the Material Transfer field. Use the and the delete buttons in the grid's toolbar to add and remove Materials.
  2. Optionally, enter a location for the Material Transfer.
  3. Optionally, enter a comment.
  4. Press Receive to complete the transaction.

special_receive_material_transfer