Automatic Track-In#

Overview#

This feature enables automatic material Track-In into the MES Resource.

Behavior#

Handle Tracking messages PCBCHECKIN and PRODSTARTED.

If First Module: Will use PCBCHECKIN and respond with PCBCHECKIN_ACK with:

• Result = 0 (OK) if material is successfully tracked in
• Result = 1 (NOK) if material could not be tracked in

If Following Modules: Will use PRODSTARTED and respond with PRODSTARTED_ACK with:

• Result = 0 (OK) if material is successfully tracked in
• Result = 1 (NOK) if material could not be tracked in

Configuration Options#

• Allow the user to configure the first module of the Fuji machine
• Allow the user to enable or disable the Track-In functionality
• Allow the user to validate BOM at start of production

Relevant Artifacts#

The table below describes the properties for this entity type:

How It Works#

Area Feature Checks#

• Resolves the MES Resource Name using FUJI_LineNameMachineNameModuleNo_.
• Checks if Areas' FUJINEXIM_maxNumberOfRetries is defined.

Resource Feature Checks#

• Checks if FujiIsFirstModule is set to true for the resource.
• Checks if UseFujiToTrackIn is enabled.
• Checks if UseTrackInOperation is defined:
  • If defined, uses the specified operation.
  • If not, defaults to ComplexTrackIn.

Material Operations#

Calls the DEE IoTMaterialOperation unless UseFujiToTrackIn is not set, in which case the DEE call is bypassed.

After a successful Track-In using PCBCHECKIN a queue will be generated for the next Module to store the Material Identification to use for PRODSTARTED event.

If is PRODSTARTED we will retrieve the queue and check if for the current Module we have any

Track-In Configuration#

SmartTable IoTMetadataDefinition should be configured with the following entries:

BOM Pre-Check Validation#

• Enable BOM validation by setting usebomvalidation = true
• Define the MES service to be used via useBOMValidationService

<Input object>, <Namespace> | <url>. (default value: Cmf.SMT.IoT.Utilities.Orchestration.InputObjects.ValidatePlacementListInput, Cmf.SMT.IoT.Utilities.Orchestration | api/IoTUtilities/ValidatePlacementList).