Automatic Track-Out#
Overview#
This feature enables Automatic MES material Track-Out to the current Resource.
Currently supported events Keys:
*551TraceDataComponentRequest (This is also used when you want to Track-Out using 550 TraceData Event) * 602MachineEvent
How To Configure#
Relevant Artifacts#
The table below describes the properties for this entity type:
| Name | Type | Is Mandatory | Data Type | Description |
|---|---|---|---|---|
| IoTMetadataDefinition | SmartTable | Yes | Metadata configuration for equipment integration | |
| IoTMaterialOperations | Service | Yes | Service that handles Material Operations requests form equipment in MES |
How It Works#
When a event that is enabled to Track-Out the material out of the resource is received we will:
-
Check Conditions
- Wait for traceability data to be processed(If configured).
- When timeout is reached will continue.
-
Perform Track-Out
- Trigger the configured PanaCIM event (usePanaCIMToTrackIn).
- Execute MES operation (ComplexTrackOut or ComplexTrackOutAndMoveNext).
The Controller will call MES DEE IoTMaterialOperation to handle the tracking operation.
Assumptions#
SmartTable IoTMetadataDefinition is configured, other than the general setup keys (check Setup for more information), with the following entries for each station:
| Resource | ResourceType | Area | Name | Value | Description |
|---|---|---|---|---|---|
| MES PanaCIM Station X Resource | usePanaCIMToTrackOut | Supported Event String | Track In Material with the chosen event.See List at the top of this page. | ||
| MES PanaCIM Station X Resource | waitForTraceToDoTrackOut | True | Activate wait for track-out to finish on previous PanaCIM module. | ||
| MES PanaCIM Station X Resource | useWaitTimeout | True | Set max waiting time. (10 = 1000 ms) | ||
| MES PanaCIM Station X Resource | useTrackOutOperation | True | MES Track-Out operation to be performed on the current Material. ComplexTrackOut or ComplexTrackOutAndMoveNext. Defaults to ComplexTrackOut if not defined. |