# Automatic Track-Out ## Overview This feature enables automatic material **Track-Out** off the MES Resource. ### Behavior Handle Tracking message `PCBCHECKOUTV` for Pick and Place and `PCBCHECKOUTP` for Solder Paste Printer. ### Relevant Artifacts The table below describes the properties for this entity type: | Name | Type | Is Mandatory | Data Type | Description | | :------------------- | :------------ | :----------: | :-------- | :--------------------------------------------------------- | | IoTMetadataDefinition | SmartTable | Yes | | Metadata configuration for equipment integration | ## How It Works ### Area Feature Checks * Resolves the MES Resource Name using `FUJI_LineNameMachineName_{EquipmentLineName}_{EquipmentMachineName}`. * Checks if Areas' `FUJINEXIM_maxNumberOfRetries` is defined. ### Feature Checks * Checks if `UseFujiToTrackOut` is defined for the received event. * Checks if `UseTrackOutOperation` is defined: * If defined, uses the specified operation. * If not, defaults to **ComplexTrackOut**. ??? info "Track-Out Operations" - TrackOut - ComplexTrackOut - ComplexTrackOuts - ComplexTrackOutAndMoveNext - ComplexTrackOutsAndMoveNext ### Material Operations Calls the DEE `IoTMaterialOperation` unless `UseFujiToTrackOut` is not set, in which case the DEE call is bypassed. ### Assumptions SmartTable IoTMetadataDefinition is configured with the following entry for each station: | Resource | ResourceType | Area | Name | Value | | ----------------- | ------------ | -------------- | ------------------------------------------------------------------- | ------------------- | | | | Fuji Line Area | FUJI_LineNameMachineName_{EquipmentLineName}_{EquipmentMachineName} | MES ResourceName | | MES Main Resource | | | UseFujiToTrackOut | PCBCHECKOUTV | | MES Main Resource | | | UseTrackOutOperation | *TrackOutOperation* |