Recipe Management#
Overview#
This feature enables the automatic change of MES Sub Resource and Main Resource Recipe.
Relevant Artifacts#
The table below describes the properties for this entity type:
| Name | Type | Is Mandatory | Data Type | Description |
|---|---|---|---|---|
| IoTMetadataDefinition | SmartTable | Yes | Metadata configuration for equipment integration |
How It Works#
When a P&P event PGCHANGEII or a SPP event PGCHANGEP is received from the Fuji, the system takes the following actions:
Area Feature Checks#
For the Pick & Place machines, the system uses IoTMetadataDefinition to determine the MES Sub-Resource Name through FUJI_LineNameMachineNameModuleNo_{EquipmentLineName}_{EquipmentMachineName}/{EquipmentModuleNumber}. For the Solder Paste Printer machines, the system uses IoTMetadataDefinition to determine the MES Resource Name through FUJI_LineNameMachineNameModuleNo_{EquipmentLineName}_{EquipmentMachineName}.
Resource Feature Checks#
It verifies if the UseFujiToPgChange feature is enabled for this MES Resource(SPP) or Sub-Resource (P&P) in IoTMetadataDefinition.
MES Operations#
If the feature is enabled, the Automation Manager Controller changes the recipe for the specific module and main resource when the event is coming from first module of the pick and place machine.
Once the recipe is changed, the Automation Manager sends a PGCHANGEII_ACK or PGCHANGEP_ACKacknowledgment message back to the equipment.
This message includes the result of the operation:
OKif successfulNot OKif it failed
Assumptions#
SmartTable IoTMetadataDefinition is configured with the following entry for each station:
| Resource | ResourceType | Area | Name | Value |
|---|---|---|---|---|
| MES Fuji Station X Resource | UseFujiToPgChange | True | ||
| Fuji Line Area | FUJI_LineNameMachineNameModuleNo_{EquipmentLineName}_{EquipmentMachineName}/{EquipmentModuleNumber} | MES ResourceName |