Skip to content

POST SendResultData Request#

Overview#

The system must process POST requests sent to the /sendresultdata endpoint to create materials in MES based on the information contained in the MARKINGRETURN object. The CONTENT field contains the panel and board identifiers, while BAD_MARK is used to identify X-OUT boards. The system processes POST requests received at the /sendresultdata endpoint, validating the lot, resource, product BOM, and remaining quantity. If validation succeeds, the materials are created in MES using the returned identifiers and X-OUT information.

How To Configure#

Relevant Artifacts#

The following table lists the entities relevant to the implementation of this requirement:

Name Type Is Mandatory Description
IoTMetaDataDefinition SmartTable Yes Smart Table used to configure REST server addresses and ports.
SMTNutekCreateMaterials DEE Yes DEE used to perform validations and create panel and board identifiers.

How It Works#

  1. The host receives a POST request at the /sendresultdata endpoint.
  2. By default, the system invokes the SMTNutekCreateMaterials DEE, or another DEE configured in IoTMetaDataDefinition under SendResultDataDEE.
  3. After all validations are completed, the DEE creates the panel and board materials in MES:
  4. VARIABLE="BRD" is used to create the panel.
  5. VARIABLE="PCB" is used to create the boards.
  6. If BAD_MARK within MARKINGRETURN is set to true, the corresponding board is created as an X-OUT.
  7. After receiving the DEE response, the response payload is generated.
  8. The system returns an HTTP 200 response containing the generated payload.
  9. In case of an error, a dedicated error payload is generated and returned.

Assumptions#

  • The /sendresultdata endpoint is accessible and correctly configured.

Example Payload#

Request#

```json{ "MESSAGEID": 23, "MACHINEID": "LASER01", "USERNAME": "OPERATOR01", "WORKORDER": "123456", "MARKINGRETURN": [ { "VARIABLE": "BRD", "INDEX": 0, "X": "10", "Y": "20", "CONTENT": "1234567", "TOPORBOT": "TOP", "SCANRESULT": "SCAN_PASS", "GRADING1": "0.3372549;D", "GRADING2": "-0.05820614;A", "GRADING3": "0;Off", "GRADING4": "0.8333333;A", "GRA_OVERALL": "B", "LASER_POW": 40, "BAD_MARK": false, "MARK_PLACE": "FirstPosition", "DATETIME": "2025-04-15T22:27:24.791+03:00" } ] } ...

### Reply

```json{
  "STATUS": "OK",
  "REASON": "",
  "DATA": [
    {
      "RESULT": "0",
      "MSG": "OK"
    }
  ]
}